Fire Extinguishers Proof of Performance Fire Extinguisher Inspections Enter the Location of this particular device.Extinguisher ID and Location Number(Required)Inspected by:(Required)Device Label Picture(Required)Please take a picture of the device up close to include the label and the inspection tag.Accepted file types: jpg, jpeg, png, gif.Inspection Tag – Date and Initial the Tag NowPlease make sure to record today’s inspection on the TAG on the device.Pressure GuageLocate the pressure gauge at the top of the cylinder.Is the pressure gauge pointed within the optimal green range?(Required) Yes No For a quick fix: Sometimes, the pressure gauge is in the red because of the chemical having settled down in the cylinder. Try fixing this by removing the fire extinguisher from its bracket/container, carefully turn it upside down twice, and shake it well. Check if the gauge indicator goes back to green.PhysicalIs the cylinder tank and all external metal parts free of corrosion, dents or other signs of damage?(Required) Yes No Is the sticker/label on the cylinder readable?(Required) Yes No Is the hose free of cracks or other signs of damage?(Required) Yes No Have a look at the inside of the nozzle. Does it show any leak?(Required) Yes No Is the seal and pin present and intact? (The seal's material can be plastic or metal)(Required)The seal is the tag around the handle holding the pin in place. Yes No AccessibilityHow do you get to the device in the event of an emergency?Picture(Required)Please take a picture of the fire extinguisher showing it and the surrounding area.Accepted file types: jpg, jpeg, png, gif.Is the device easily visible?(Required) Yes No Is the device's immediate surrounding free from obstruction?(Required) Yes No Is the device easily removable from its bracket/container?(Required) Yes No
